Description
Main Unit Structure
Smoke Diagnostic Leak Detector is designed for detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
Operation
- Open the engine cover, and hang the detector in the cover.
- Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
- Secure this side with proper taper stopple/ pipe, and connect it with smoke output tube.
- Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way.
- Turn on the power switch, and the detector starts to work.
- In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
- After leak detection, please connect well the wires and pipe.
Reviews (0)
view all
back